TASCAM CD-A750 RS-232C Protocol Specifications
11
TEAC
Corporation
Command 18
Machine ID
0
Data none
Return none
TRACK SKIP
Causes the CD player of the controlled device to skip tracks.
After skipping, the device will maintain the mode in which it was when the operation began.
Command 1A
Machine ID
0
Data 2
bytes
Data 1
Data 2
Description
Remarks
0
0
Track Skip Next
Skips to the next track.
0 1
Track Skip
Previous
If the current position is at the beginning of a track,
skips to the beginning of the previous track. If the
current position is not at the beginning of a track, skips
to the beginning of the current track..
・
If data other than the above is received, the controlled device will transmit ILLEGAL [F2].
Return none
CALL
Causes the controlled device to locate to the call point and enter playback-ready mode.
Command 1D
Machine ID
0
Data none
Return none
AUTO CUE LEVEL PRESET
Sets the Auto Cue Level of CD player of the controlled device.
A return command is returned only if Sense [FF] is specified.
The Auto Cue Mode setting is made using the command "AUTO CUE SELECT [30]."
Command 20
Machine ID
0
Data 2
bytes
Data 1
Data 2
Description
Remarks
0 0
Preset
–24dB
0 1
Preset
–30dB
0 2
Preset
–36dB
0 3
Preset
–42dB
0 4
Preset
–48dB
F
F
Sense
Requests that the current preset level to be returned.
・
If data other than the above is received, the controlled device will transmit ILLEGAL [F2].
Return
AUTO CUE LEVEL RETURN [A0]
DIRECT TRACK SEARCH PRESET
Searches for the specified track number.
When this command is received while in PLAY mode, the CD player of the controlled device will
enter PLAY mode after searching. If the CD player of the controlled device had been in any other
mode when searching began, it will be in play ready mode after searching.
Command 23
Machine ID
0
Data 4
bytes
Description
Remarks
Data 1
Tens digit of the track number
Track number
