background image

12.7 Update Firmware

TASCAM Tower CD Duplicator User’s Manual

21

12.7 Update Firmware

The 

Update Firmware

 function updates the firmware of the interface board via 

compact disc (CD). The CD must contain the required data file and be inserted in 
the source drive. The CD Duplicator will locate the data and update its firmware 
automatically. During the update, do not turn off the power to the unit. The update 
process is complete after the system resets automatically and displays the main 
menu.

12.8 Compare Firmware

The 

Compare Firmware

 function compares the current firmware version in the 

interface board to the update version in the disc. 

12.9 H/W Diagnostic

The 

H/W Diagnostic

 function detects the devices connected to the interface board, 

confirms functionality, and displays information about the hardware on the LCD.

12.10 Load Default

The 

Load Default

 function resets all settings to factory default values. It is 

recommended that you reset to the default values if the CD Duplicator fails to 
function properly after you make changes to the original configuration.

12.11 CD+G

The 

CD+G

 function enables or disables CD+G (karaoke CD) format support. The 

default setting is 

OFF

.

12.12 ISRC & MCN

The 

ISRC & MCN

 function enables or disables ISRC and MCN format support. 

The default setting is 

ON

.

12.13 CD-Text

The 

CD-Text

 function enables or disables the copying of CD-Text discs. The 

default setting is 

OFF

.

12.14 Switch USB Mode

The 

Switch USB Mode

 function is not applicable to either the CD-D13 or 

CD-D17HD Tower CD Duplicators.

Note: 

The CD+G value must be set to OFF before you can use the Track 

Extraction features.

Summary of Contents for CD-D13







































Reviews: