background image

Normal Conditions (for CD-D17HD only)

TASCAM Tower CD Duplicator User’s Manual

25

Normal Conditions (for CD-D17HD only)

Audio Editing

Message

Meaning

HDD not Format!

The hard disk has not been formatted.

Format HDD?

Do you want to format the hard disk?

All data will be lost, format?

All data on the hard disk will be lost. Confirm the format 
request.

Format HDD OK!

Formatting of the hard disk is complete.

Image load OK

The image has been successfully loaded from CD to the 
hard disk.

Image load Fail

The image has not been loaded successfully from CD to 
the hard disk.

HDD too small to handle 
image!

The hard disk capacity is insufficient to store the data 
image (at least 5Gbytes is required).

No Valid HDD!

The system cannot locate a hard disk.

HDD too small

The hard disk capacity is too small.

No Image in Partition xx

There is no data image in the specified partition.

Image Exists Overwrite?

The current partition contains a data image. Confirm the 
overwriting request.

Delete Image in Partition xx?

Confirm the request to delete the data image in the spec-
ified partition.

Partition Damage

The partition is damaged.

Verify Disk Or Partition?

Do you want to verify the entire hard disk or only a parti-
tion?

Verify Hard Disk OK!

The hard disk has been verified successfully.

Verify the Hard Disk Fail!

The hard disk has not been verified successfully.

Verify Partition Header!

Verify the partition header.

Select HDD First!

First select a formatted hard disk.

Message

Meaning

Lost selected Tracks?

Abort and delete the selected tracks.

End edit disc and burn?

Finish the music disc editing and start to copy.

Continue edit next Disc?

Do you want to continue the music disc editing?

Target Overflow Re-Select

The disc capacity is insufficient to store the selected 
tracks. Please select fewer tracks.

Close all disc's session?

Confirm the closing of disc sessions.

Can't edit HDD

The hard disk cannot be edited as a source audio disc.

NO AUDIO track in this disc

The source disc contains no audio tracks.

Insert next disc

Insert the next audio disc.

Sessions were closed already!

The disc sessions have already been closed.

Burn or Move to partition?

Do you want to copy the data directly to CD-R discs or 
transfer the data to a hard disk partition?

Tgt overflow, del last trk?

Disc capacity is insufficient to store the selected tracks. 
Do you want to delete the last track?

Ins empty disc Continue?

Do you want to insert a blank disc and continue copying?

Summary of Contents for CD-D13







































Reviews: