5 – Recording—Rec mute function
TASCAM CD-RW402
Owner’s Manual
37
“Trimming” the increment time
It is also possible to move the track increment time
backwards and forwards by up to 125 frames either
before or after the received track division signals (in
the same way as for sync recording as described in
““Trimming” the sync” on page 35.
1
Press the
MENU
key (2) and turn the
MULTI
DIAL
to display
REC MENU 2 ?
.
2
Press the
MULTI DIAL
.
3
Turn the
MULTI DIAL
until the display shows
INC TRIM ?
.
4
Press the
MULTI DIAL
.
5
Turn the
MULTI DIAL
to change the
INC_T
(sync trim) value between –125 frames and
+125 frames (in 1 frame steps).
6
Press the
MULTI DIAL
to make the setting and
leave the menu.
Rec mute function
The rec mute function allows instant cut-off of the
input signal, and records silence on the disc.
1
While recording is in progress, press the
REC
MUTE
key.
The display shows
REC MUTE
, the meters stop
displaying the current level and the moni-
tored sound is cut.
2
After a set time (see below), the unit enters
record ready mode.
Setting the REC MUTE time:
The time during which recording is muted before the
drive enters record ready after the
REC MUTE
key
has been pressed is set in the following way:
1
Press the
MENU
key (2) and turn the
MULTI
DIAL
to display
REC MENU 2 ?
.
2
Press the
MULTI DIAL
.
3
Turn the
MULTI DIAL
until the display shows
REC MUTE TM ?
.
4
Press the
MULTI DIAL
.
5
Turn the
MULTI DIAL
to change the
MUTE_TM
(mute time) value between 1s and 10s (in 1
second steps).
6
Press the
MULTI DIAL
to make the setting and
leave the menu.
Fade-in and fade-out
To provide smooth beginnings and endings to
recorded tracks, the unit provides fade facilities.
Fade-ins are from –
∞
(silence) to the set input level
(“Signal volume” on page 30) and fade-outs go from
the current input volume to silence.
The fade-in and fade-out times can be set indepen-
dently in increments of one second, from 1 second to
24 seconds.
To set the fade times:
1
Press the
MENU
key (2) and turn the
MULTI
DIAL
to display
REC MENU 1 ?
.
2
Press the
MULTI DIAL
.
3
Turn the
MULTI DIAL
until the display shows
FADE IN TM?
or
FADE OUT TM?
as appropriate.
4
Press the
MULTI DIAL
.
5
Turn the
MULTI DIAL
to change the fade time
(
FADE IN
or
FADE OUT
) value between 1s and 24s
(in 1 second steps).
6
Press the
MULTI DIAL
to make the setting and
leave the menu.
