background image

 

2 - Parts of the CD-RW5000

 

  TASCAM CD-RW5000 

 

13

 

The remote control unit keys are listed here, together 
with the number (in square brackets) of the corre-
sponding key on the main unit, when these keys are 
identical in function to those on the main unit. When 
these keys have a different function, or are additional 
to those on the main unit, an explanation of their 
function is provided.

 

[30] OPEN/CLOSE key

 

See 

 

[4]

 

.

 

[31] Number keys

 

These number keys are used to select tracks for pro-
grammed playback, or to select a particular track to 
play. See section 3, "Playback operations", for details 
of how to perform these operations.

When entering track numbers greater than nine, the 
two keys corresponding to the digits that compose 
the track number should be pressed in quick7 succes-
sion. For instance, when entering track number 14, 
first press the 

 

1

 

 key, quickly followed by the 

 

4

 

 key.

 

[32] REPEAT key

 

This key works in the same way as the repeat key on 
conventional CD players.

Repeated presses of this key will cycle between the 
following repeat modes: repeating the current track 
(

 

REPEAT 1

 

), repeating the whole disc (

 

REPEAT

 

 

 

ALL

 

), and no repeat.

 

[33] PGM key

 

Use this key in conjunction with the number keys for 
programmed playback, as described in 3.3.1, "Pro-
grammed playback".

 

[34] DISPLAY key

 

See 

 

[6]

 

.

 

[35] FINALIZE key

 

See 

 

[11]

 

.

 

[36] ERASE key

 

See 

 

[12]

 

.

 

[37] SYNC START key

 

See 

 

[18]

 

.

 

[38] AUTO/MANUAL

 

See 

 

[7]

 

.

 

[39] TRACK INCR key

 

When the track increment function is in manual 
mode, as selected with the 

 

AUTO/MANUAL

 

 key 

 

[7]

 

, pressing this key while a disc is being recorded 

will increment the current track number. See 4.4, 
"Manual track division" and 4.4, "Manual track divi-
sion" for details.

This is equivalent to pressing the 

 

RECORD

 

 key on 

the main unit 

 

[17]

 

 when recording a disc. This key 

has no effect in playback mode.

 

[40] SKIP keys

 

See 

 

[13]

 

.

 

[41] SEARCH keys

 

These three keys allow fast playback in either the for-
ward or backward direction in order to assist precise 
location of a point on a disc, similar to the cue and 
review modes on a tape recorder.

Pressing the 

 

 

 or 

 

Ô

 

 

 

key will start playback at 

twice normal speed in either the forward or backward 
direction respectively.

Pressing the 

 

FAST 

 

key, followed by the 

 

 

 or 

 

Ô

 

 

 

key, will start playback at eight times normal speed 
in either the forward or reverse direction, 
respectively.

 

[42] STOP key

 

See 

 

[14]

 

.

 

[43] PLAY key

 

See 

 

[15]

 

.

 

[44] PAUSE key

 

See 

 

[16]

 

.

 

[45] RECORD key

 

See 

 

[17]

 

.

Summary of Contents for CD-RW5000




























Reviews: