1-Introduction
TASCAM CD-RW900
25
5− Advanced Recording
Rec mute function
The Rec mute function allows instant cut-off of the input
signal, and records four seconds of silence on the disc.
While recording is in progress, press the
REC MUTE
key on the remote contorl.
The display shows the
Rec Mute
flashing, the meters
stop displaying the current level and the monitored
sound is cut.
After about four seconds, the unit enters record ready
mode.
NOTE
This function is only available from the remote control
unit.
Manually divide track
While recording is taking place, press the
RECORD
key.
The current track number is incremented by one.
For details of automatic track division while record-ing,
see “Automatic track division” on page 24.
NOTE
≠
According to the “Red Book” (the specification for
audio CDs), a track cannot be less than four sec-
onds in length, and there can be a maximum of 99
tracks on an audio CD. Bear these limitations in
mind when adding track divisions.
≠
This operation can not be applied during recording
the track 99.