Tascam CD-RW900mkII, Owner'S Manual

TASCAM  CD-RW900MKII

 29

6 − After recording

Refreshing a disc

Refreshing the disc makes a disc usable again. This operation 

destroys all data on the disc.

1.  Load the disc, and the unit in stop mode, press the 

ERASE/DEL

 key on the front panel or the 

ERASE 

key on the remote control. Select the 

REFRESH? 

rotating the 

MULTI JOG

 dial or pressing the 

SKIP

key on the remote control.

To cancel the operation at this point, press the 

ERASE/DEL

 or the 

ERASE

 key again.

2.  Push the 

MULTI JOG

 dial or press the 

ENTER

 key 

on the remote control to enter the function. The 

display shows 

Sure?

To cancel the operation at this point, press the 

STOP

 key.

3.  Push the 

MULTI JOG

 dial or press the 

ENTER

 key 

again to proceed the operation.

The display shows 

Erase

 flashing and the remaining 

time. The unit starts counting down from a time 

shown on the display.

4.  When the disc has been refreshed, 

Complete

 appears 

then 

Blank Disc

 will appear on the display.

Erasing a whole disc

When you want to erase a whole disc (all the tracks on a disc), 

follow the procedure below:

NOTE

Once the operation is proceeded, the 

STOP

 key 

cannot function. Please confirm before the operation.

1.  While stopped, press the 

ERASE/DEL

 key on the 

front panel or the 

ERASE

 key on the remote control. 

Select the 

ERASE DISC?

 by rotating the 

MULTI 

JOG

 dial or pressing the 

SKIP

 key on the remote 

control.

To cancel the operation at this point, press the 

ERASE/DEL

 or the 

ERASE

 key again.

2.  Push the 

MULTI JOG

 dial or press the 

ENTER

 key  

to enter the function. The display shows 

Sure?

To cancel the operation at this point, press the 

STOP

 key.

3.  Push the 

MULTI JOG

 dial or press the 

ENTER

 key 

again to proceed the operation.

The display shows 

Erase

 flashing and the remaining 

time. The unit starts counting down from a time 

shown on the display.

4.  When the disc has been erased, 

Complete

 appears 

then 

Blank Disc

 will appear on the display.

Erasing tracks

Erasing

This operation erases the specified track and all sub-sequent tracks 

from a recorded CD-RW disc.

NOTE

Once this operation has started, the 

STOP

 key cannot 

be used to cancel it. Please check the track range to be 
deleted first.

Erasing track is operated only when unit is in continu-
os playback.

1.  While stopped, press the 

ERASE/DEL

 key on 

the front panel or the 

ERASE

 key on the remote 

control. Select the 

ERASE TRACK?

 rotating 

the 

MULTI JOG

 dial or pressing the 

SKIP

 key on the 

remote control.

To cancel the operation at this point, press the 

ERASE/DEL

 or the 

ERASE

 key again.

2.  Push the 

MULTI JOG

 dial or press the 

ENTER

 key  

to enter the function.

The display shows 

Erase XX-XX

 (the number of 

the first track and last track to be erased).

Rotate the 

MULTI JOG

 dial or press the 

SKIP

 key to 

change the track numbers you desire to erase.

To cancel the operation at this point, press the 

ERASE/DEL

 or the 

ERASE

 key again.

3.  Push the 

MULTI JOG

 dial or press the 

ENTER

 key to 

operate the function.

The display shows 

Sure?

To cancel the operation at this point, press the 

STOP

 key.

4.  Push the 

MULTI JOG

 dial or press the 

ENTER 

key 

again to proceed the operation.

The display shows 

Erase

 flashing and the remaining 

time. The unit starts counting down from a time 

shown on the display.

5.  When the tracks have been erased, 

Complete

 will 

appears on the display.