English
4. More advanced operation
16
TASCAM CD-X1700 DUAL CD PLAYER
Effect time setting
When an effect is activated, using the Jog wheel
can adjust the effect time.
The effect time parameter is shown in the
parameter display.
…
When the scratch function turns on, the
effect time cannot be controlled with
the Jog wheel.
Synchronizing the effect time with the
BPM
When an effect is activated and FX SYNC key is
turned on (FX SYNC key lights), using the Jog
wheel can change the effect beat synchronized
with the BPM.
The effect beat parameter is shown in the
parameter display.
…
When scratch function turns on, the
effect beat cannot be controlled with
the Jog wheel.
Effect level setting
When an effect is activated , pressing and holding
the SHIFT key then pressing the activated effect
key enters the effect level setting mode. In this
mode, using the Jog wheel can change the effect
level.
NOTE
NOTE
The effect level parameter is shown in the
parameter display.
FLANGER
Pressing the FLANGE key activates the Flanger
effect.
Effect time: 10msec – 16sec (default: 500msec)
Effect beat: 32, 16, 8, 4, 2, 1, 1/2 (default: 1)
Effect level: 0 – 100 (default: 75)
ECHO
Pressing the ECHO key activates the Echo effect.
Effect time: 1msec – 3,500msec (default:
500msec)
Effect beat: 2, 1, 3/4, 1/2, 1/4 (default: 1)
Effect level: 0 – 100 (default: 75)
FILTER
Pressing the FILTER key activates the Low pass
filter effect.
Effect time: 10msec – 16sec (default: 2sec)
Effect beat: 32, 16, 8, 4, 2, 1, 1/2 (default: 4)
Effect level: 0 – 100 (default: 75)
Filter effect has two operation modes, manual
mode and auto mode. In manual mode, filter
frequency can be controlled with the Jog wheel.
In auto mode, filter frequency is moved
automatically followed by BPM and effect beat
parameter.
Pressing and holding the FILTER key more than
1.5 seconds changes the filter effect mode.
…
When filter effect mode is set to manual
mode, you can move the filter frequency
using with the Jog wheel even if the
scratch function
NOTE
