Advanced techniques
TASCAM DP-01 Owner’s Manual
31
EQ settings
EQ settings
This can help you
emphasize the par-
ticular frequency ranges on a track.
On the DP-01, you can set the frequency at which the EQ HIGH and
EQ LOW controls work; individually for each channel.
1
Press
MENU
, and then select the
PREFERENCE
menu.
The
NSP
setting is
only available on
the DP-01FX and DP-01FX/CD.
The DP-01 will not show this option.
2
Use the arrow keys to scroll to
EQ FRQ
:
3
Press the
cursor key:
4
Use the cursor keys and wheel to set these parameters.
Source
This is the track affected by this setting, from
Track1
through
Track8
.
High
This is the frequency for the
EQ HIGH
control. Choose from 1.7, 1.8,
1.9, 2.0, 2.2, 2.4, 2.6, 2.8, 3.0, 3.2, 3.4, 3.6, 3.8, 4.0, 4.5, 5.0, 5.5,
6.0, 6.5, 7.0, 7.5, 8.0, 9.0, 10, 11, 12, 13, 14, 15, 16, 17, 18 (all mea-
sured in kHz).
Low
This is the frequency for the
EQ LOW
control Choose from 32, 40, 50,
60, 70, 80, 90, 100, 125, 150, 175, 200, 225, 250, 300, 350, 400,
450, 500, 600, 700, 800, 850, 900, 960 (Hz), 1.1, 1.2, 1.3, 1.4, 1.5, or
1.6 (kHz).
DP-01_OM_E.book 31 ページ ２００５年６月１３日 月曜日 午後７時１４分
