Tascam D01086320A, Owner'S Manual

TASCAM  CD-200i

33

If you have problems with your system, look through this 
chart and see if you can solve the problem yourself before 
calling your dealer or TEAC service center.

No power

ª

e

 Is the unit’s power plug completely inserted into a 

working power outlet? 

Remote control doesn’t work.

ª

e

 Check to see if the batteries are properly installed in the 

remote control.

e

 If the batteries are dead, change the batteries.

No sound

ª

e

 Check the connection to the monitor system again.

e

 Check the volume and settings of the amplifier.

There is unwanted noise. 

ª

e

 Are the connecting cables all properly connected and 

functioning?

A CD cannot be played back.

ª

e

 If you are using a data CD with MP3 files, confirm that 

the file bit-rates are compatible with this unit. 

e

 Is the disc scratched or dirty?

The files on a data CD cannot all be played 

ª

back. 

e

 Is the unit in folder playback mode?

The iPod cannot be connected to the iPod 

ª

dock.

e

 Confirm that the correct dock adapter has been inserted into 

this unit’s iPod dock.

e

 Confirm that no debris or dust is stuck to this unit’s iPod 

dock and then try to connect the iPod again.

The iPod cannot be controlled.

ª

e

 Is the iPod connected correctly with the unit’s dock 

connector?

e

 Is the unit’s power plug completely inserted into a 

working power outlet?

e

 Is the iPod selected as the output source? 

e

 Unlock the HOLD switch on the iPod.

e

 Remove the iPod from the iPod dock once and then wait a 

moment before reconnecting the iPod.

e

 Updating the iPod software frequently resolves problems. 

Please visit Apple’s website and check for the latest information.

There is no sound or video from the iPod. 

ª

e

 Is the iPod playing?

e

 Is the iPod connected correctly with the unit’s dock 

connector?

e

 Is the unit’s power plug completely inserted into a 

working power outlet? 

e

 Is the video or S-video cable correctly connected?

e

 Is the television input set to the video input jack to 

which this unit is connected?

e

 Are the iPod video output and television output settings 

matched correctly (NTSC or PAL)? 

7 − Troubleshooting