TASCAM DA-3000
41
6 − Playback
Adding marks manually during
playback
When stopped, when in playback standby or during playback,
you can add marks manually to the track in any positions you
like. During track playback, you can move quickly to marks.
Adding marks during playback
When a track is stopped, playing back or in playback standby,
press the MULTI JOG dial (or remote control MARK button) at
any point where you want to add a mark.
NOTE
• Each track can store information for a maximum of 99
added marks.
• You can also add marks during recording. (See “Adding
marks manually during recording” on page 29.)
Locating to marks
When a track is stopped, playing back or in playback standby,
you can turn the MULTI JOG dial (or use the remote control F3
[+]/F4 [−] buttons) to locate to marks.
Turn the MULTI JOG dial right to locate to the nearest later mark
or left to locate to the nearest previous mark from the current
position.
Deleting marks
You can delete an added mark when stopped or when in
playback standby.
1. Move to the mark that you want to delete. (See “Locating to
2. Press the MULTI JOG dial to open the DELETE MARKS
pop-up.
3. Turn the MULTI JOG dial to select whether to delete one
mark or all marks in a file.
Options:
SINGLE: Delete only the selected mark.
ALL:
Delete all the marks added to the current file.
4. Press the MULTI JOG dial to delete the mark or marks.
If you selected SINGLE, the Home Screen will reappear after
the selected mark is deleted.
If you selected ALL, a confirmation pop-up message will
appear.
Press the MULTI JOG dial again to delete all the marks added
to the current file.
The Home Screen will reappear after all the marks are
deleted.
NOTE
To cancel marked deletion, press the
EXIT/CANCEL [PEAK
CLEAR]
button.
Repeat playback
The unit can play back a single track or all tracks in the current
folder repeatedly.
1. Press the MENU button repeatedly to open the
PLAY
FUNC
menu, and turn the MULTI JOG dial to select
REPEAT
.
2. Press the MULTI JOG dial to open the
REPEAT
screen.
3. Turn the MULTI JOG dial to select the repeat playback mode.
Options:
OFF (default):
Repeat playback disabled
SINGLE:
Repeat playback of the current file
ALL:
Repeat playback of all files in the
current folder
4. Press the MULTI JOG dial to confirm the selection and return
to the menu screen.
5. After completing the setting, press the HOME/DISPLAY
button (or remote control F2 button) to return to the Home
Screen.
6. Select the track that you want to play back repeatedly and
start playback.
