DM-3200 Release Notes
TASCAM DM-3200 Release Notes V1.50
The
PROJECT
Property shows date information, but in
previous versions this was the date of creation. This has
been fixed so that the most recently edited date and time
are shown. When you press the
STORE
button in the vari-
ous
LIBRARY
screens, the resulting operation had been the
same as when pressing the
STORE AS
button. This has been
changed so that the operation is the same as when you
press the top panel
STORE
key.
The file name used when you store by pressing the
STORE
button in the
AUTOMATION>FILES
screen is now the same as
when you store by pressing the
KEEP
key.
Change in the date information for Project Property
Maintenance Items
This sectiondescribes the Maintenance items for each revision of the DM-3200 software.
Maintenance Items in V1.30
Project
Create project
A problem has been fixed which had sometimes made it
impossible to create a new project after the current project
name was edited.
Load project
A problem has been fixed in which the LED indicating the
ª
ª
selected control room source was displayed incorrectly
when a project was loaded.
A problem has been fixed in which the cascade connection
status sometimes became invalid when loading a project
that changed the cascade master/slave relationship.
CF cards
A problem has been fixed that had caused the capacity to
be shown incorrectly for CF cards larger than 1G byte.
A problem has been fixed that had caused the status of a
CF card to be sometimes detected incorrectly when the CF
was formatted at start-up.
A problem has been fixed that had caused the status of a
CF card formatted on Windows XP or Mac OS 10.4.3 to be
detected incorrectly
V1.30 Remote control
Ch 9-16 screen text display when using
Sonar4
A problem has been fixed in which the text display for
each module was not shown in the channel 9-16 screen
when using Sonar 4 in the Mackie Control mode.
Stereo fader operation using Mackie
protocol and another external controller
When the Mackie Control External Controller was used in
conjunction with another External Controller that used the
remote fader bank, moving the master fader would operate
the Mackie Control master fader function even when the
fader bank was currently assigned to the other controller.
This has been fixed.
ª
ª
MMC CHASE command
The MMC machine control CHASE command is now
supported.
In setups in which P2 protocol is used to control a VTR or
other device, and the recorder is the time-code slave, the
recorder can be set to MMC control to allow recording on
the recorder.
Fig 20: machine_P2mmc.png
ª
Maintenance Items in V1.50
V1.50 Remote control
Previously, the LCD would unexpectedly switch focus
when both MIDI Faders and the DAW Control Surface
feature was being used and the master fader touched.
This has been fixed.
