background image

18

 

TASCAM  DP-004

2–Quick Start Guides

4  Use the 

DATA 

wheel keys to select 

SONG001

 and press 

F2 (EXEC) 

to load this song that does not have any 

recordings in it yet.

  The 

SONG

 menu screen reopens.

5  Press the 

HOME

 key to return to the Home Screen.

Setting the guitar as track 1 recording source

The default settings are for the 

INPUT A

 channel to be 

the recording source for tracks 1 and 3 and for the 

INPUT B 

channel to be the recording source for tracks 

2 and 4. 
In “Connecting and setting the input sources” above, 

we made a guitar the input source for the 

INPUT A

 

channel and a built-in mic (

MIC B

) the input source 

for the 

INPUT B

 channel. Therefore, the guitar is 

already set to record to tracks 1 and 3 and 

MIC B

 is 

ready to record to tracks 2 and 4. 
As a result, there is no need to change the input 

channel assignments to record the guitar to track 1 

in this example. See “Adding another recording (1)” 

on page 21 and  “Adding another recording (2)” on 

page 22 for how to change track recording sources.

Adjusting the input level and monitoring

Use the 

INPUT A

 channel 

LEVEL

 knob to adjust the 

guitar input level. 
Set the 

LEVEL

 knob so that the 

INPUT A

 channel 

OL

 

indicator does not light even when the loudest sound 

to be recorded is input. If the indicator continues to 

light even when the 

LEVEL

 knob is turned down, the 

guitar signal itself is too loud. In this case, lower the 

output level on the guitar.

OL indicator

When you play the guitar, its input level is shown by 

the 

A

 meter on the screen. 

Summary of Contents for DP-004

















































































































Reviews: