2
TASCAM DP-004
Printed in China
DP-004
Release Notes
CAUTION
If this screen does not appear, turn the power OFF.
•
Then while pressing and holding both the
REPEAT
and
UN/REDO
keys, turn the unit’s power ON again.
Continue to press and hold the
REPEAT
and
UN/REDO
keys firmly until this screen appears.
When firmware has been copied to this unit’s
•
UTILITY
folder from a Mac, in addition to the firmware file itself,
another file with “._” added to the beginning of the
firmware name is also shown. Use the file without the
“._” at the beginning of the name.
NOTE
This screen shows a list of the firmware update files
•
inside the
UTILITY
folder of the unit. Also, the screen
shows the firmware copied at Step 3 above.
No Update File
appears if there is no update
file in the
UTILITY
folder.
The screen shown is an example. The actual display
•
differs.
6 Select the firmware (highlight the item) using
F1 (
§
) and F2 (
¶
), then press F4 (
NEXT
). The
following screen appears.
The current version appears on the left and the
updated version appears on the right.
NOTE
The screen shown is an example. The actual display differs.
7 Press the F3 (
YES
) key to start the update.
8 When the update is complete, the power turns OFF
automatically. Turn the power ON again.
9 Follow the “Confirmation of firmware version”
instructions above to check that the “System
Version” is now the most recent version of the
firmware.
This completes the procedure for updating this unit.
10 Connect to a computer with USB and delete the
firmware update from the unit’s
UTILITY
folder.
