background image

40

 

TASCAM  DP-004

4–Preparations

5

 

Recorder transport state

When playing 

¥

 appears. When stopped

 

·

appears. 

When recording 

 appears.

6

 

Repeat playback mode indicator

When repeat playback is active

appears.

7

 

Recorder time counter

Shows the elapsed time from the start of the song. 

8

 

Cursor key that shows the time increment being edited

Turning the 

DATA

 wheel changes the value of the 

selected time increment.

9

 

Shows the F1 key function

When the Home Screen is open, press the 

F1

 key to 

move the increment affected by the 

DATA

 wheel.

0

 

Level meter for input channels A and B

Shows the signal level for input sources A and B.

q

 

Level meters for tracks 1–4

Shows the input level when recording and the 

playback signal level when playing back.

w

 

Level meter for stereo outputs (L, R)

Shows the output signal level from the 

/LINE OUT

 

connector.

Screen Organization

The display provides information and allow various 

settings to be made and functions to be used. 
Most operation screens are accessed by pressing the 

MENU

 key to open the 

MENU

 screen from the Home 

Screen, but some have dedicated keys.

Screens accessed from the 

MENU

 screen

INFORMATION

 

SONG

 

 menu

CARD

 

 menu

TRACK EDIT

 

 menu

WAVE

 

 menu

DATA BACKUP

 

 menu

TUNER

 

 

METRONOME

 

PREFERENCE

 

Screens accessed using dedicated keys

INPUT SETTING

 

 (use 

INPUT SETTING

 key)

INPUT ASSIGN

 

 (use 

ASSIGN

 key)

I/O SETTING

 

 (use 

IN/OUT

 key)

RECORDER MODE

 

 (use 

REC MODE

 key)

HISTORY

 

 screen (use 

STOP

 + 

UN/REDO

 keys)

Summary of Contents for DP-004

















































































































Reviews: