background image

5–Song Management

TASCAM  DP-004

 

51

Copying songs

Songs in the currently active partition can be copied 

to the same and different MTR partitions. Multiple 

songs can also be copied at once. 

1  When the transport is stopped and the Home 

Screen is open, press 

MENU

 to open the 

MENU

 screen.

2  Turn the 

DATA

 wheel to select 

SONG

, and press the  

F4

 (

¥

) key to open the 

SONG

 menu screen. 

3  Turn the 

DATA

 wheel to select 

COPY

, and press the  

F4

 (

¥

) key. 

  This opens the 

SONG COPY

 screen, which shows a list 

of songs in the active partition. 

4  Turn the 

DATA

 wheel to select a song that you want 

to copy, and press the 

F4

 (

) key. 

  The song is selected as a copy source and a check 

appears in the checkbox. 

NOTE

To remove the check from the checkbox (deselect the 
song), press the F4 (

) key while the song is selected. 

5  To copy multiple songs, repeat step 4. 
6  After selecting all the songs that you want to copy, 

press the 

F2 (

NEXT

)

 key to open a screen where you 

can select the partition that you want to be the copy 

destination. 

7  Turn the 

DATA

 wheel to select the copy destination 

partition and press the 

F4 (

EXEC

)

 key. 

Summary of Contents for DP-004

















































































































Reviews: