58
TASCAM DP-004
6–Basic Recording
1 Press
ASSIGN
to open the
INPUT ASSIGN
screen.
As shown above, the input channel that is the
recording source for each track (1–4) is shown.
In the initial setting,
INPUT A
is assigned as the
recording source for tracks 1 and 3, and
INPUT B
is
assigned as the recording source for tracks 2 and 4.
2 Use the
F3
(
§
) and
F4
(
¶
) keys to select a track to
change its current input channel.
3 Turn the
DATA
wheel to set the input to
IN A
or
IN B
.
4 When finished making settings, press the
HOME
key to return to the Home Screen.
Making the first recording
Before following recording procedures below,
confirm that the source that you want to record is
connected, and that the input channel is assigned a
recording source for a track. Monitoring headphones
should also be connected.
1 Press the
REC
key of the track to record on. The
REC
indicator blinks red (that status is called
“record standby”). A maximum of two tracks can
be recorded simultaneously. If you press a different
REC
key when the
REC
indicators of two tracks are
already blinking, the track that was put into record
standby first will become inactive and the
REC
indicator will turn off.
