20
TASCAM DP-008EX
2–Quick Start Guides
9. Return to the beginning of the song
(00h00m00s00f) and press the Play (
7
) button
while pressing and holding the Record (
0
)
button to begin recording. Play the lead guitar
part.
The Record (
0
) indicator lights and the TRACK 3
REC indicator stops blinking and stays lit.
10. When you are finished playing, press the Stop (
8
)
button to stop recording.
11. Press the TRACK 3 REC button to turn its REC
indicator off.
Creating a stereo master track
After finishing the recording, we will mix down the
tracks and create a stereo master track
1. Use the TRACK 1-3 LEVEL knobs to adjust the
level. Use the MASTER LEVEL knob to adjust the
overall level.
2. Use the TRACK 1-3 PAN knobs to adjust the
stereo positions.
Watch the (left channel) and (right channel)
level meters on the display as you make these
adjustments.
3. Press the IN/OUT button to open the I/O SETTING
screen.
4. Press the Play (
7
) button to start playing the
song back, and press the F3 [IN] button to set the
IN point at the point where you want to start the
mix down for the stereo master track.
A
SET IN!
pop-up message appears.
NOTE
The stereo master track will be created by mixing
down the audio between the IN and OUT points.
