background image

38

  TASCAM DR-07MKII

Powering the unit

DR-07MKII can operate on two AA batteries, or 

through an optional AC adapter (TASCAM PS-P515U) 

or USB cable provided with the unit (USB bus power). 
Alkaline or Ni-MH batteries can be used.

Using AA batteries

Open the battery compartment cover on the 

back of the unit. Fit two AA batteries to the + and 

– marks shown in the compartment, and close 

the battery compartment cover.

When using AA batteries, set the type of battery 

in order to accurately show the amount of power 

remaining and allow the unit to accurately determine 

whether power is available for proper operation. (See 

“Setting the type of AA batteries” on page 110.)

NOTE

 Manganese dry cell batteries (R6) cannot be used with 

• 

this unit.
This unit cannot recharge Ni-MH batteries. Use a 

• 

commercially available recharger.
The included alkaline batteries are for confirming 

• 

operation of the unit and might not last very long.

Using an AC adaptor (sold separately)

Connect the PS- P515U AC adaptor and the USB cable 

to the USB port of the unit as shown in the illustration.

AC Outlet

TASCAM 

PS-P515U

USB (mini B) plug

3–Preparation

Summary of Contents for DR-07MKII





























































































































Reviews: