TASCAM DR-44WL
45
8 – QUICK Button Operation
Mixing down
This function combines multiple files into a single stereo file.
Adjustments of the effect level (
SEND
), right and left positions
(
PAN
), volume balance (
LEVEL
) can be freely set on the
MIXER
screen. (See “Setting the mixer” on page 46.)
1. Use the
.
/
/
button to select file you want to mix
down on the
BROWSE
screen for 4CH operation mode
or on the
SONG
screen for MTR operation mode. (See
“Selecting Operation Mode” on page 17.)
2. While the Home Screen is open when stopped or paused,
press the QUICK button to open the Quick pop-up menu.
3. Using the wheel, select (highlight)
MIXDOWN
and press
the ENTER/MARK button.
The following confirmation message will pop-up:
Popup display in 4CH mode
4. Press ENTER/MARK button to start mixing down return to
the Home screen after mixing down.
Press the
8
/HOME button to return to the Home screen
without mixing down files.
5. After mixdown completes, the Home screen reopens, and
the mixdown file that was created is loaded. In this state, you
can press the
7
/
9
button to play the mixdown file.
NOTE
•
When a mixdown file is created, it is named by adding an
incremental number to the end of the name of the file used
before mixdown.
•
When files created in 4CH mode are mixed down, a file is
created with "MIX" added to the end of the file name.
Loading master tracks (MTR mode
only)
A file mixed down from files created in MTR mode can be
loaded.
1. Set the operation mode to
MTR
2. Load the mixdown file on the
SONG
screen. (See “Loading
3. While the Home Screen is open when stopped or paused,
press the QUICK button to open the Quick pop-up menu.
4. Use the wheel to select
MASTER TRACK
and press
the ENTER/MARK button. This loads the master track and
reopens the Home screen.
NOTE
The
icon appears at the top of the Home screen when
a master track is loaded.
If there is no master file, a
NO MASTER TRACK
pop-up message will appear.
5. Press the
7
/
9
button to start playback of the master file.
NOTE
After loading the master track, select
MULTI TRACK
from the Quick menu and press the
ENTER/MARK
button to
return to ordinary MTR mode.
