48
TASCAM DR-44WL
10 – Useful functions
10. Once tuning has been completed, set
SOUND
to
OFF
and press
8
/HOME button to return to the Home screen.
Metronome function (compatible with
V1.10)
Metronome operates when the
METRONOME
screen is open.
1. Press the MENU button to open the
MENU
screen.
2. Using the wheel, select (highlight)
TOOLS
and press the
ENTER/MARK or
/
button.
TOOLS
screen appears.
3. Use the wheel to select
METRONOME
and press the
ENTER/MARK or
/
button.
Exec
appears selected for
the
METRONOME
item.
4. Press the ENTER/MARK button to open the
METRONOME
screen.
Set the following items on the
METRONOME
screen.
TEMPO
Set speed between
20
-
250
(BPM).
(default value:
120
)
BEAT
Set beat between
1
-
9
(default value:
4
)
This will accent the first beat.
SOUND
You can set the metronome sound to
CLICK
,
STICK
or
BELL
. (default value:
CLICK
)
LEVEL
Set the metronome volume between
0
and
100
.
(default value:
50
)
5. Use the wheel to select the item to set and press the ENTER/
MARK button. This shows the parameters for the item to be
set.
6. Use the wheel to select the value. Press the ENTER/MARK
button to confirm it and enable selection of other setting
items.
7. Repeat steps 5 and 6 as necessary.
8. Press the
7
/
9
button to start the metronome. Press the
7
/
9
button to stop the playing metronome.
9. Once the setting has been completed, press the
8
/HOME
button to return to the Home screen.
Reverb function
A reverb is incorporated into this unit.
When recording or practicing, the input signal can be reverbed
or the playback signal can be reverbed during playback.
When reverb function is ON, the
icon will appear at the
top of the home screen.
REVERB icon
Setting the reverb function
1. Press the MENU button to open the
MENU
screen.
2. Using the wheel, select (highlight)
REVERB
and press the
ENTER/MARK or
/
button.
The
REVERB
screen is displayed.
The
REVERB
screen has four setting items.
REVERB:
Set the reverb on/off status (default value:
OFF
).
TYPE:
See the reverb type from the pre-set items. See (See
“How to download and install the exclusive application
(TASCAM DR CONTROL)” on page 51.) for more details
on reverb types.
SOURCE:
You can select input/output source to be reverbed from
the following: (default value:
MIX
)
SOURCE (options)
Detail
MIX (default value)
Enabled for SEND:
Reverb can be added to the
output sound.
The recorded sound is not
affected.
INT MIC
Enabled for input:
Reverb can be added to the sound
input from the built-in mic.
Sound can be recorded with
reverb added.
EXT IN
Enabled for input:
Reverb can be added to the sound
input from external mics and
devices.
Sound can be recorded with
reverb added.
