TASCAM DR-680
3
DR-680
Release Notes
The unit starts up in update mode, and the update file
appears on the screen.
CAUTION
If this screen does not appear, turn the power OFF.
•
Then while pressing and holding both the MENU and
PLAY/PAUSE keys, turn the unit’s power ON again.
Continue to press and hold the MENU and PLAY/
PAUSE keys firmly until this screen appears.
When firmware has been copied to this unit’s UTILITY
•
folder from a Mac, in addition to the firmware file
itself, another file with “._” added to the beginning of
the firmware name is also shown. Use the file without
the “._” at the beginning of the name.
NOTE
This screen shows a list of the firmware update files
•
inside the UTILITY folder of the unit. Also, the screen
shows the firmware copied at Step 3 above. “No
Update File” appears if there is no update file in the
UTILITY folder.
The screen shown is an example. The actual display
•
differs.
6 Select the firmware (highlight the item) then press
ENTER
. The following screen appears.
The current version appears on the left and the updated
version appears on the right.
NOTE
The screen shown is an example. The actual display
differs.
7 Press the
ENTER
key to start the update.
8 When the update is complete, the power turns OFF
automatically. Turn the power ON again.
9 Follow the “Confirmation of firmware version”
instructions above to check that the “
Version
” is
now the most recent version of the firmware.
This completes the procedure for updating this unit.
10 Connect to a computer with USB and delete the
firmware update from the unit’s
UTILITY
folder.
