TASCAM DR-70D
11
Turning the unit off (putting it in
standby)
When on, slide the
HOLD/
switch toward
until
LINEAR PCM RECORDER
appears on the
display.
The unit turns off (enters standby) after it completes
its shutdown process.
Inserting SD cards
1. Open the front cover on the front of the unit.
2. Insert an SD Card into the slot as shown in the
illustration until it clicks into place.
Camera connection and
attachment
In order to output the sound from this unit to a DSLR
camera and monitor sound from the camera with
this unit, you must connect them with commercial-
ly-available 3.5mm stereo mini plug cables.
1. If you want to record audio from this unit with a
camera, connect the
OUT
jack on the right
side of this unit with the external mic input on
the camera.
If you want to input audio from the camera and
monitor it with this unit, connect the
IN
jack on the right side of this unit with the audio
output jack on the camera.
DSLR camera
Audio output jack
External mic input jack
NOTE
Refer to the camera’s operation manual to
identify connectors on the camera.
2. Use the
OUTPUT LEVEL
item on the
MONITOR
SETTING
screen to adjust the volume output
to the camera.
3. To mount the camera on this unit, use the
camera attachment screw on the top of the
unit.
Connecting external mics and
monitoring equipment
Connect an external stereo mic to the
EXT IN 1/2
jack on the right side of the unit.
To listen with headphones, connect them to the
PHONES
jack.
To listen with an external monitoring system
(powered monitor speakers or an amplifier and
speakers), connect it to the
OUT/LINE OUT
jack.
Headphones
Powered monitor
speakers or amplifier
and speakers
External mic
