background image

32 

TASCAM  DR-70D

7 – Connecting with a Computer

By connecting this unit with a computer using the USB cable, 

you can transfer audio files on the SD card in the unit to a 

computer, as well as transfer audio files on the computer to the 

card.
This unit can handle audio files of the following formats.

WAV: 44.1/48/96kHz, 16/24-bit
BWF: 44.1/48/96kHz, 16/24 bit

Connect the included USB 

cable

microB USB plug

Computer

NOTE

• 

Instead of using USB to connect the unit and a computer, 

you can also conduct the same operations by removing 

the SD card from the unit and connecting it directly to a 

computer that has a built-in SD card slot or by using a card 

reader.

• 

Both WAV and BWF files uses the same “.wav” file extension.

CAUTION

• 

You cannot use this unit’s other functions when it is 

connected to a computer by USB and set to 

STORAGE

.

• 

The unit should be connected directly with the computer 

instead of via a USB hub.

The 

USB SELECT

 screen appears when the unit is connected 

by USB and when the unit is turned on if the USB cable is already 

connected. On this screen, choose between USB bus power 

supply or USB connection with the computer.

Use the DATA dial to select 

STORAGE

, and press the DATA dial 

to connect the unit with the computer for data transmission. 

USB connected

 appears in the display.

Make sure that an SD card is properly inserted in the unit.

NOTE

Power is supplied from the USB port if the USB cable is 

connected to a unit that contains batteries. (USB bus power 

prioritized).

This unit appears on the computer as an external drive named 

“DR-70D” (if the card has been formatted by this unit).

Transferring files to a computer

1.  Click the “DR-70D” drive on the computer screen to show the 

“MUSIC” and “UTILITY” folders.

2.  Open the “MUSIC” folder and drag and drop the files that 

you want to transfer to the computer to the destinations of 

your choice.

Transferring files from a computer

1.  Click the “DR-70D” drive on the computer screen to show the 

“MUSIC” and “UTILITY” folders.

2.  Drag and drop files on the computer that you want to 

transfer to the unit to the “MUSIC” folder.

TIP

• 

You can manage the MUSIC folder from the computer.

• 

You can create subfolders in the MUSIC folder. The unit can 

use only two levels of folders. The unit cannot recognize 

subfolders and files on the third level or below.

• 

If you name subfolders and music tracks, these names will 

appear on the Home Screen and the 

BROWSE

 screen of the 

unit.

Disconnecting from a computer

Before disconnecting the USB cable, use the proper procedures 

for your computer to unmount the unit.
The unit turns off (enters standby) after it completes its 

shutdown process.
See the computer’s operation manual for instructions about 

how to unmount an external device.

Summary of Contents for DR-70D











































Reviews: