24
TASCAM DR-70D
4 – Recording
Recording (MONO/STEREO/2MIX)
Starting recording
1. Press the record (
0
) button to start ordinary recording.
When recording starts, the REC indicator lights continuously,
and the display shows the elapsed recording time and the
remaining recording time.
2. Press the record (
0
) or 1/
8
button to stop recording.
NOTE
To avoid recording the noise of pressing the
record (
0
)
button, recording starts 0.3 second after the button is
pressed.
File names when recording in MONO
When mono recording, a file will be made for each channel.
The file names will be as follows.
TASCAM̲0001S1.WAV
1
: Set with the
WORD
item on the
FILE NAME
screen
2
: Recording file project number
3
: Source file
4
: Assigned channel
File names when recording in STEREO/2MIX
When stereo recording, a file will be made for the 1/2 or 3/4
channel pair.
The file names will be as follows.
TASCAM̲0002S12.WAV
1
: Set with the
WORD
item on the
FILE NAME
screen
2
: Recording file project number
3
: Source file
4
: Assigned channels
Creating a new file without
interrupting recording (track
incrementing)
You can manually create a new file without pausing recording
and set the unit to automatically do the same when the file size
reaches 2 GB.
Manual track incrementation during
recording
You can manually split a recording by creating a new file.
1. Press the 3/
/
button while recording to create a new file.
NOTE
When new files are created, incremental numbers are added
to the end of each file name.
CAUTION
•
A new file cannot be created if the total number of folders
and files would exceed 5000.
•
Files shorter than two seconds cannot be created. Moreover,
if the sampling frequency is 96 kHz, files shorter than four
seconds cannot be created.
•
If the name of a newly created file would be the same as
that of an existing file, the number will be incremented until
the new file has a unique name.
Automatic track incrementation during
recording
Without pausing recording, a new file can be created automati-
cally during recording when the file size reaches 2 GB.
CAUTION
A new file cannot be created if the total number of folders
and files would exceed 5000.
