background image

7 − Copy function

 

TASCAM  DV-RA1000HD

 

To select all tracks, press the 

F2

 (

ALL SEL.

) key.

 

To deselect all selected tracks, press the 

F3

 

(

ALL REL.

) key.

6

  When you finish selecting tracks, press the 

ENTER

 

key.

 

The DV-RA1000HD displays a screen that en-
ables you to edit the name of the files that will be 
duplicated in the specified project.

Figure 7.12: File name

 

The default file name is 
“YYYYMMDD_hhmm_TT.wav”. (YYYY: year; 
MM: month; DD: date; hh: hour; mm: minute; 
TT: track number) 
You cannot change the track number or exten-
sion (.wav).

If you press the 

CANCEL

 key, instead of the 

ENTER

 key in Step 6, the DV-RA1000HD 

returns to the destination project selection 

screen.

7

  Edit the file names.

 

Use the 

F1

 and 

F2

 keys to change the input 

mode, 

F3

 and 

F4

 keys to move the cursor, and the 

JOG/DATA

 dial to select a character.

 

You can also input characters using a keyboard 
connected to the PS/2 connector.

8

  When you finish editing the text, press the 

ENTER

 

key.

 

The unit displays a message that requests confir-
mation for copying tracks to the HD.

 

If a file in the HD uses the same name as the 
selected source file, the DV-RA1000HD displays a 
duplicate file screen that lists all files that use the 
same name. Follow the procedure in the “Same 
project name in the destination” section to re-
solve the name duplicate issues, then press the 

ENTER

 key.

If you press the 

CANCEL

 key, instead of the 

ENTER

 key in Step 9, the DV-RA1000HD 

returns to the source track selection screen.

9

  Press the 

ENTER

 key.

 

The CD tracks are copied into the HD.

 

After the copy operation is complete, the 
DV-RA1000HD initiates a procedure to quit copy 
mode.

 

During this procedure, the DV-RA1000HD dis-
plays a progress bar. When the procedure is com-
plete, the unit automatically displays the home 
screen.

Summary of Contents for DV-RA1000HD





































































Reviews: