TASCAM HS-20
53
7 – Timeline mode
Removing set fades (Remove Fade IN/
Remove FadeOut)
1
. Press the HOME key on the front of the unit to open the
Home screen.
2
. Touch the EDIT MODE button to enter edit mode.
3
. Move the timeline cursor to the region where you want to
remove fade-in/out.
4
. Touch the Fade/Level button to open the pull-up menu.
o
To remove the fade-in, touch the Remove Fade IN button.
o
To remove the fade out, touch the Remove FadeOut
button.
5
. When fade removal is complete, the Home Screen will open
after a pop-up window is shown.
In this case, the Fade/Level pull-up menu will remain open.
Setting the playback level in the selected
region (Level)
You can set the playback level for a region (after fade-in and
before fade-out).
1
. Press the HOME key on the front of the unit to open the
Home screen.
2
. Touch the EDIT MODE button to enter edit mode.
3
. Move the timeline cursor to the region where you want to
change the playback level.
4
. Touch the Fade/Level button to open the pull-up menu.
5
. Touch the Level button on the pull-up menu.
The region at the timeline cursor is indicated in yellow, and
will be affected by the Level setting.
6
When the level knob is displayed above the Level button,
use the DATA dial to set playback level.
Setting range
−∞, −120dB to +10.0dB
7
. Touch the Level button again to hide the level knob. (The set
playback level will be saved.)
