background image

12 

TASCAM  HS-P82

Left side panel 

f

  Cord holder 

Use this to hold the cord of the included TASCAM PS-
1225L adaptor designed for this unit to prevent the plug 
from becoming disconnected. 

g

  DC 

 IN connector 

Connect the included TASCAM PS-1225L adaptor 
designed for this unit here. 

h

  COMPACT FLASH SLOT 2 (CF 2)

Insert a CF card here. 

j

  COMPACT FLASH SLOT 1 (CF 1)

Insert a CF card here. 

k

  EXT DC 

 IN connector 

Connect external DC power here. Use a supply with an 
output voltage of DC 11-16 and an output current of 2A 
or more. The connector is XLR-4-32 (1: –, 2: NC, 3: 
NC, 4: +). 

l

  DIGITAL I/O connector 

Use this D-sub 25-pin AES3-2003/IEC60958-4 (AES/
EBU) format connector for digital audio input and 
output. Transmission occurs at double speed when the 
sampling frequency is 88.2/96 kHz and at quad speed 
when 176.4/192 kHz. The digital input section includes 
a sampling rate converter that is compatible with 32–216 
kHz sampling frequencies. 

;

  CASCADE/WORD/VIDEO (IN 2) connector 

Use this BNC connector to input cascade, word clock 
(44.1, 48, 88.2, 96, 176.4 or 192 kHz as well as 48 kHz 
pull-up or pull-down) or video reference (NTSC/PAL 
black burst, HDTV Tri-Level) signals. 

z

  CASCADE/WORD (OUT 2) connector 

Use to output word sync signals (44.1, 48, 88.2, 96, 
176.4 or 192 kHz as well as 48 kHz pull-up or pull-
down). 

x

  TIME CODE/DIGITAL (OUT 1) connector 

Use this BNC connector to output SMPTE time code. 
Internal settings can be changed to allow AES3-2003/
AES-3id-2001 (AES/EBU) format digital audio signal 
to be output. Transmission occurs at double speed when 
the sampling frequency is 88.2/96 kHz and at quad 
speed when 176.4/192 kHz.

c

  TIME CODE (IN 1) connector 

Use this BNC connector to input SMPTE time code. 

v

  USB connector 

Use a USB 2.0 cable to connect this unit to a computer. 
Driver software is not necessary. The computer 
recognizes each of the CF card slots in this unit as a 
unique mass storage device, so two separate devices 
appear on the computer if both slots contain cards. Use 
the USB connection to transfer audio files on the CF 
cards in this unit to the computer. 

b

  KEYBOARD connector 

Connect an IBM PC-compatible keyboard with a PS/2 
interface, and use it to input project, scene, and channel 
names, for example. By default, the unit is set to use a 
US keyboard. When using a Japanese keyboard, since 
the key allocation is different, change the setting on the 

PREFERENCES

 page of the 

SYSTEM

 

SETUP

 screen.

2 − Names and functions of parts 

Summary of Contents for HS-P82

































































Reviews: