Page
16
of
29
Another way to edit the
NEXT TAKE NAME
is from the tab of that label. When you access the take name
from its own tab, you cannot accidently arm/disarm an input channel. Otherwise, the screen is similar.
Use whatever screen you feel comfortable with.
The
PAN LEVEL
tab is where you would normally access the
OUTPUT LEVEL
and
PAN
controls for each
input channel. Pressing the virtual knob will link it to the physical
DATA
knob on the recorder. An
advantage of using this screen instead of the Channel Setup screen for these functions is that the PAN
LEVEL screen shows meters for each channel as well as the master LR mix.
To return to the root
HOME
screen at any time, you can either untap the tab or just press the HOME
button.
Solo mode
If you press on the meter display of any input channel, it will turn yellow, indicating that you are now in
the SOLO monitoring mode. This allows you to listen to any individual channel, rather than to the master
LR mix. Note that when solo is lit up, a virtual solo volume control appears in the upper right of the
screen. It will vanish when you exit the solo mode.
