2
TASCAM HS-P82
HS-P82
Release Notes
V1.04 additions
You can now use the ENTER and ESC keys on a PS/2
•
keyboard to select the
OK
and
CANCEL
buttons,
respectively, in pop-up messages.
With the addition of the trim group function, a new
•
MIXER (TRIM GROUP)
setting has been added to the
Function Key Assign
item on the
RC-F82
page of
the
REMOTE SETUP
screen.
A mid-side microphone connection mode has been
•
added.
Turning an input trim knob to its minimum setting (all
•
the way left) now mutes the sound.
FAT16 formatting is now supported for CF cards with
•
capacities of 2 GB or less.
When the unit fails to read from a CF card, the error
•
message shown has been changed from
No Project
to
UNMOUNT
.
The precision of the Power Off Generator function has
•
been improved.
NOTE
For details about these features, please see the “HS-P82
Firmware Update V1.04” document, which is also available
from the TASCAM website.
V1.03 additions
Now works with the TASCAM RC-F82 (fader unit). For
details about the functions, see the RC-F82 Owner’s
Manual.
V1.02 additions
What had been called “scenes” before are now called
•
“folders”. Buttons and screen references have been
changed to reflect this, including the
Folder
Name
button and the
FOLDER
NAME
screen. However, the
default folder name has not changed and is still
Scene
plus three digits.
When reading the Owners Manual, please replace the
term “scene” with the term “folder”.
Numbers have been added to projects, folders and
•
takes, and these numbers are now displayed. Project
numbers are assigned to projects in the order that they
are saved on the media. Folder numbers are assigned
in order as they are created inside each project. Take
numbers are assigned in order as they are saved in a
folder.
A
•
Date
button has been added to screens where
project names, for example, are edited. This new
function allows the date set in the internal clock to be
inserted into the name.
The following screens have had a Date input button
added.
Project name editing screen when creating a new
•
project
1st folder name editing screen when creating a new
•
project
Folder name editing screen when creating a new
•
folder
Project name editing screen
•
User word editing screen for editing the next take
•
name
NOTE
If the same project name or folder name already exists, an
unused number is added after an underscore (“_”).
A
•
NEXT
TAKE
NAME
button has been added to the
Home Screen. Press this button to open the
NEXT
TAKE
NAME
pop-up window where you can edit the
name given to the next recorded take.
The take names that had been added automatically as
the first half of scene names can also be edited. Select
the
UserWord
mode (button) and press the
EDIT
button to open the screen where you can edit it. With
the exception of the numerical portion, take names
cannot be changed during recording
When set to
•
MONO
file mode, you can now select from
two types of modes for recording audio files—“Folder”
mode and “SubFolder” mode.
Folder mode: Recorded audio files are saved directly
•
inside the folder. (This mode is new.)
SubFolder mode: This is the same as how the unit
•
functioned before this update. Subfolders are
created for each take inside folders, and recorded
audio files are saved in them. The default setting is
“SubFolder”.
CAUTION
When Folder mode is selected, the number of tracks that can
be recorded is limited by the total number of items (files and
folders including ordinarily invisible ones).
Files recorded by TASCAM HD-R1 and HD-P2 units can
•
now be rebuilt by this unit.
The unit is now compatible with 32 and 64 GB CF cards.
•
Maintenance items
V1.10 fixes
The delay time to prevent misoperation after pressing
•
the SLATE key to turn it ON has been reduced from 600
ms to 200 ms.
The S/N ratio of the low range of the Low Cut Filter has
•
been improved.
The precision of the start time added to a file when
•
recording has been improved.
In order to make the
•
PROJECT
screen easier to read,
the folder icons of the current project and current
