background image

TASCAM  MD-02/MD-02B

Front panel

(see “Changing the time and character information 
display” on page 20). 

During title input, press this key to cycle through 
character types: lower case letters, upper case letters 
and katakana (see “Title input method” on page 26).

 TIME key 

88

Press this key to change the time mode shown on the 
display (see “Changing the time and character informa-
tion display” on page 20). 

During playback: track elapsed time, track remaining 
time 

During recording: recording elapsed time, disc remain-
ing time 

The time mode setting is retained even when the power 
is turned OFF. 

Remote sensor

98

When using the included wireless remote control 
(RC-MD02), point it toward this sensor. 

0

 

Display 

This shows information about discs, tracks, deck 
operation mode, menus and other items (see “Display” 
on page 11). 

q

 

POWER ON PLAY switch 

Use to turn power on play on and off. When set to 

ON

playback will begin automatically when the power 
is turned on if a disc is loaded (see “Using power on 
play” on page 19). 

w

 

INPUT (L, R) knobs

Use to adjust the analog input levels (see “Adjusting the 
recording level” on page 23). Independent adjustment 
of both left and right signals is possible. 

e

 

PHONES level knob 

Use to adjust the headphones output level. 

POWER switch

18

Turns the power ON and OFF. 

CAUTION

Minimize the volume of connected devices before 
turning the power ON. Failure to do so could cause 
sudden loud noises, resulting in hearing damage, for 
example. 

MD slot

28

Insert MD discs for recording or playback here. 

Insert in the direction of the arrow with the label side 
up. 

MENU key 

38

Press to turn the menu mode ON and OFF (see “ 4 – 
Menu Operation” on page 16). 

EJECT key 

48

Press to eject MD discs. 

REPEAT key 

58

Press to change the repeat playback mode (see “Repeat 
playback” on page 19). 

The repeat mode setting is retained even when the 
power is turned OFF. 

NOTE

If the unit is in single repeat mode when the STOP 

• 

key is pressed, the mode changes to all repeat.
If the unit is in single repeat mode when the power is 

• 

turned OFF, the mode changes to all repeat when the 
power is turned ON again.

ESCAPE key 

68

When in menu mode, press this key to return to the 
previous menu (see “ 4–Menu Operation” on page 16). 

DISPLAY key 

78

When stopped, press this key to show the current disc 
title on the display. During playback and playback 
standby, press this key to show the current track title 

2 − Names and Functions of Parts

Summary of Contents for MD-02









































Reviews: