background image

TASCAM MiNiSTUDIO CREATOR

 

13

This setting will lock again when you click the   

button or type command-Q to close the System 

Preferences or when you click “Show All” to close 

the open pane.

CAUTION

Changing the Gatekeeper setting could result in 

security risks.
If you changed the Gatekeeper setting to 

decrease security (use one of the lower settings), 

set it back to the original setting after updating 

the software and/or firmware. (When installing a 

firmware update immediately after software, do 

this after installing the firmware update.)

Connecting the power

When using a computer (Windows/Mac)

Normally, when this unit is connected to a computer, 

it will operate using USB bus power, so connecting a 

separate power supply device is not necessary.

When using an iOS device

When this unit is connected to an iOS device, 

connecting an external battery, USB power adapter 

or other power supply device is necessary in order to 

power the unit.
Connect an external battery pack (TASCAM BP-6AA) 

or the USB power adapter included with the iPad or 

iPhone to a USB cable (sold separately), and connect 

it to the DC IN 5V port.

External battery pack

Connect USB cable 

(purchased separately)

CAUTION

•  No USB power adapter is included with an iPod 

touch. To use it with an iPod touch, purchase 

a genuine Apple USB power adapter (that can 

supply 5 V and a current of at least 700 mA) 

separately.

•  Operation with other external battery packs and 

USB power adapters is possible, but we strongly 

recommend using a TASCAM BP-6AA external 

battery pack or the genuine Apple USB power 

adapter included with the iPad/iPhone.
When using another external battery pack or 

USB power adapter, be sure that the power 

supply device meets the following specifications.

•  Supplied voltage: 5 V
•  Supplied current: 700 mA or more

Using a power supply device when the speci-

fications are other than the above could 

cause malfunction, overheating, fire or other 

problems. If anything abnormal occurs, stop use 

and contact the retailer where you purchased 

the unit or a TEAC service center to request 

repair.

Connection illustrations

Guitar

Mic

Examples of connections to a MiNiSTUDIO (top)

Summary of Contents for MINISTUDIO CREATOR US-42





























Reviews: