and output jacks and sound cards. Simply by using the MiNiSTUDIO series, you can enjoy personal
broadcasting and audio production with high quality sound without needing to do anything else
such as making particular settings.
(Photo at right: Tascam devices are used for triggering sound effects at a broadcast station)
Low-noise mic inputs that support condenser mics
We applied our expertise gained from the development of professional audio and music creation
equipment to the audio circuits, starting with the mic inputs. With them, you can achieve audio that
is clearer and has lower noise than is possible using a computer audio input or sound card.
Preamps with extrav agant discrete construction (MiNiSTUDIO Creator only )
The MiNiSTUDIO C reator, which also supports audio creation, uses
input circuits of even higher quality. Mic sound quality is dependent on the mic preamplifier. The
HDDA (High Definition Discrete Architecture) mic preamps use discrete construction that requires a
higher number of components. This distances them from other preamps. We selected all the parts
through listening evaluations to tune the sound quality.
Equalizer and compressor preset for talk programs
The built-in equalizer and compressor, which are functions to adjust the sound, are set for use with
a talk show when the unit is shipped new from the factory, so you will be able to achieve clear
sound without changing any settings. You can change the sound to a type you like simply by
selecting a preset using the dedicated software.
Two input jacks (MiNiSTUDIO Creator only )
The MiNiSTUDIO C reator has two mic input jacks that can be used for various applications
including performances with vocals and instrument or guest interviews. Both support the direct
input of condenser and dynamic mics as well as guitars.
EXPERT page allows adv anced settings and sound adjustment
Switch between the EASY tab for basic settings and the EXPERT tab for advanced settings in the
dedicated software. On the EXPERT page, in addition to making fine adjustments to equalizer,
compressor and other effect settings, you can also change the signal routing.
