Snapshot functions
Snapshots are used to save and recall settings, including mixer
signal processing and routing.
Storing and recalling snapshots
1.
Press the MENU key (
q
) to open the Menu Screen.
Use the Snapshot selection buttons ( / ) at the top of
the Menu Screen to select a number. Then, tap the RECALL
button to recall the settings for the number shown, or tap
the STORE button to save settings to the number shown.
2.
Tap the snapshot number/name area at the top left of the
Menu Screen to open the Snapshot List Screen.
Tap the list and select a slot. Then, tap the RECALL button to
recall the settings for that slot, or tap the STORE button to
save settings to that slot.
3.
Use the Recall Safe settings to set items that will be
protected (not changed) when recalling snapshots.
To change the Recall Safe settings, tap the RECALL SAFE
button on the Snapshot List Screen to open the SNAPSHOT
RECALL SAFE Screen.
4.
Snapshot data can also be imported from and exported to
external storage.
To import/export snapshot data, tap the IMPORT/EXPORT
button at the bottom of the Snapshot List Screen to open
the SNAPSHOT IMPORT/EXPORT screen.
Troubleshooting
If you are having trouble with the operation of this unit, please
try the following before seeking repair.
If these measures do not solve the problem, please contact
the store where you purchased this unit or TASCAM customer
support service.
Power will not turn on
o
Confirm that the power plug and other connectors are
inserted completely.
No sound is output
o
Confirm that the input and output routings and bus
assignments are correct.
o
Check connections with the monitoring system again. Check
the volume of the amplifier as well.
o
Confirm that the monitoring sources are correctly selected.
o
Are that channel faders raised to suitable levels?
o
Confirm that the MASTER fader is raised to a suitable level.
o
Confirm that the PHONES or MONITOR OUT volume is raised
to a suitable level?
o
Are any of the channel MUTE (
3
) or SOLO (
4
) keys on?
There is noise
o
Confirm that the connection cables do not have contact
issues.
Changed settings are forgotten
This unit saves settings at one-minute intervals.
Since saving could fail depending on when the power is turned
off, use the Save Current Settings item on the Menu Screen to
save the current settings in the internal memory before turning
the power off.
TASCAM Sonicview 16/Sonicview 24
39
ENGLISH
