Section VI, Continued
Section VI, page 5
To change your effects set-up:
1) Press SHIFT and PARAM SEL simultaneously.
Option
Effect
?
2) Rotate the DATA ENTRY dial to Effect.
Press ENTER.
Effect
Effect Pattern
?
3) Rotate the DATA ENTRY dial to Effect Pattern.
Press ENTER.
Effect Pattern
L-R:Eff1
4) Rotate the DATA ENTRY dial to the desired
effect pattern. Press ENTER.
Aux1-2:Eff2 ?
If you are assigning stereo effects, then you can move on to the next page. If you are assigning channel
dynamics, then continue below. (The built-in effects processor is now set up for your processing slots,
but the individual dynamics still need to be assigned to specific channels.)
5) Press ESCAPE one time.
Effect
Effect Pattern
?
Effect Pattern
Ch Dynamics Insert
6) Rotate the DATA ENTRY dial to Ch Dynamics Insert.
Press ENTER.
?
Ch Dynamics Insert
_
7) Rotate the DATA ENTRY dial to select a channel, and press the
DATA ENTRY dial down to insert or remove a dynamic processor.
The channel numbers are silkscreened on the frame of the display window.
TASCAM TM-D1000 Tutorial
1/99
TASCAM
TM-D1000
