RM-D1000 - Rack Ears for TM-D1000
Rack ears for the TM-D1000. FYI - The black wrist rest can come off of the TM-D1000 to save space.
FX-D1000 - Digital Effects Card
This card essentially doubles the internal effects capability of the TM-D1000, adding 4 more processing
slots (making it a total of 8.) You will need version 1.18 or later to install and use the card. If you need a
system update, it is available free of charge from TASCAM.
IF-TD1000 - Digital I/O Expansion Card
This card adds a second TDIF port, a digital in and out on both SPDIF and AES/EBU, and a sample rate
converter. With this card, you can feed every channel with digital information, using 16 channels on
TDIF, three stereo digital outs and two stereo digital ins. The IF-TD1000 makes the TM-D1000 more
than just a great multitrack board... it also becomes an amazing digital router! You will need version 1.18
or later to install and use the card. If you don’t have that system, it is available free of charge from
TASCAM.
MA-AD8 - 8 Channel Digital Mic Preamp
The MA-AD8 has 8 high quality mic pre-amps with digital audio converters. Each mic pre has gain
control, phantom power and a pad. All the signals are converted to digital, and sent through a TDIF line.
There are 2 TDIF ports on the unit, allowing cascading of units.
The MA-AD8 has a multitude of applications. One is to simply add more analog inputs to the TM-D1000.
With this, it becomes a powerful 16 channel live mixer. In the recording environment, it can add more
analog ins for large scale recording without losing the TDIF port for the multi-track. (The multitrack
cascades through the MA-AD8’s second TDIF port.) For the club gigs, you can record 8 tracks of live
audio for 1 hour and 48 minutes in 4 rack spaces with the DA-38 and MA-AD8!
CUPW88D and CUPW88DL - TDIF Dubbing Cables
These are the model numbers for the CableUp! TDIF digital cables. The CUPW88D is 1 meter in length.
The CUPW88DL is 5 meters in length.
MMC-38 - MMC/MTC/SMPTE for the DA-38
The MMC-38 does a number of things for the DA-38: It converts MIDI Machine Control into TASCAM
Sync, and converts the DA-38 Absolute Time Code (the time displayed on the front time counter) into
both MIDI time code and SMPTE time code. So, you get timecode without striping a tape track with
timecode. The time code converter supports 24, 25, 29.97 & 30 drop and non-drop frame rates.
MMC-88 - MMC/MTC/SMPTE for the DA-88
This unit is basically the same thing as the MMC-38, but designed for the DA-88. If your DA-88 does not
have an SY-88 card in it, the MMC-88 will provide a lower cost alternative if the DA-88 is only going to
be the master in the sync set-up.
Section XIV
Optional Accessories for the TM-D1000
Section XIV, page 1
TASCAM TM-D1000 Tutorial
1/99
