11 - MIDI Machine control
31
TASCAM TM-D1000 Operations Manual
11.6Locating to a memory position
Locating to a memory position is done by holding
down the
SHIFT
key and pressing the
CH SEL
key of
the channel (location memory) to which you will be
locating.
11.7Editing a memory location
1
Press the
MEMO
key so that the display
shows
MEMO Edit
on the top line.
NOTE
If MIDI Timecode is currently being received
at the
MIDI IN
jack, you must press the
MEMO
key twice to obtain the
MEMO Edit
mes-
sage. If MIDI Timecode is not being received,
you only need to press the
MEMO
key once.
2
Press the
CH SEL
key of the memory location
you want to edit.
A memory location which has not been used (no
value has been captured for it) will show
00h00m00s00f
as the location value.
3
Push and turn the
DATA ENTRY
knob to
move the cursor.
4
Turn the
DATA ENTRY
knob to set the values
of the field highlighted by the cursor.
Operating Tip
You can also use the
CH SEL
keys here as
number keys. The
CH SEL
keys of channels 1
through 9 enter their respective numerals,
and the
CH SEL
key of channel 10 acts as a 0
key.
5
After checking that the new values are cor-
rect, press the
ENTER
key to confirm your
setting.
