40
TASCAM US-16x08
Ejemplo de conexión a otro equipo
Batería
Guitarra
Bajo
Auriculares
Micro vocal
Teclado
Módulo de efectos
USB
Ordenador
Monitores autoamplificados
o amplificador y altavoces
Caja de ritmos
CUIDADO
•
Antes de realizar ninguna conexión, apague tanto esta unidad como el resto de aparatos que vaya a conectar (déjelos en el modo de
espera).
•
Los interruptores de alimentación fantasma se usan en grupos de cuatro canales. No ajuste la alimentación fantasma a
+48
cuando
vaya a conectar un micrófono que no requiera alimentación fantasma.
•
No conecte ni desconecte ningún micrófono mientras la alimentación fantasma esté en la posición
+48
. El hacer esto puede dar
lugar a un fuerte ruido e incluso posibles daños en esta unidad y en el equipo conectado.
•
Ajuste los mandos
LINE OUT
y
PHONES
a su posición mínima antes de utilizar el interruptor de alimentación fantasma
+48/OFF
.
Si no lo hace, es posible que se genere un ruido fuerte repentino en el equipo de monitorización, y esto podría provocar daños en el
equipo o lesiones en el oído.
•
La activación de alimentación fantasma a algunos micros de cinta puede llegar a hacer que la cinta se rompa. Si no está seguro de si
puede activarla o no, nunca active la alimentación fantasma a un micro de cinta.