18
TASCAM US-16x08
6 – Using the Settings Panel
OUTPUT SETTING page
On the OUTPUT SETTING page, you can visually check the routing of signals output from the LINE OUT 1-8 jacks and select them.
Windows̲PC画面
1
2
Windows Settings Panel screen
1
Output signal selection
Click a box to the right of a LINE OUT X (“X” is 1–8) label to
open a pull-down menu with BUS line selection options.
Select the signal that you want to output from this menu.
Options: COMPUTER 1 – COMPUTER 8, MASTER L/
MASTER R
2
Output signal routing status
This shows the connection of the signals with the output
jacks as selected in area
1
.
• Stereo BUS outputs
The signals input through each input jack and by USB
output from the computer are mixed and output in stereo.
For details, see “Block diagrams” on page 31 in this
manual.
• Computer BUS outputs
Select output signals from the Computer BUS (1–8), which
come from DAW software running on the computer, to
output them directly from the desired jacks.
NOTE
The output signals selected for LINE OUT 1 and LINE OUT 2
will also be output from the
PHONES
(L/R) jack.
