8
1. Press
DVD
and then
SELECT
. The light will flash twice.
2. Instead of entering a DVD code, enter the TV code for the desired TV. The light will flash
once for each digit.
3. Press
SELECT
and the light will flash 3 times. Now the DVD button will act as a second
TV. This works with all six devices, so it is possible to program up to six TV’s, VCR’s, etc.
For example, to program a Sony TV in the Satellite box button, press:
SAT SELECT 3 7 3 SELECT
Now the SAT button will act as a Sony TV.
Search For Correct Code
If you cannot locate a device code in the manual, and do not wish to “Learn” the code, you can
try cycling through the internal device code libraries to find the correct code for a TV, VCR etc.
It may exist.
Manually turn on the device.
Press the device key for the device code you want
to search for. For example, to search for a TV
code, press
TV
once. (1 Flash)
TV VCR SAT
, etc.
5
Press the
SELECT
button once. (2 Flashes)
SELECT
55
Press
0 0 0
(Flashes once for each digit
pressed)
0
5
0
5
0
5
Press the
SELECT
to change to the next device
code. Every time
SELECT
is pressed, the device
code will increment.
SELECT
555
Press the device key again to lock in the
discovered code.
TV
or
VCR
or
C/SAT
5
Note
: Some devices, such as cable boxes, may not support power buttons on the remote. In this
case, you can substitute
CH+
or any other supported button to test the code.
