Task Force Tips CrewProtect 20 Instructions For Installation, Operation And Maintenance Download

Page: 5 / 8

©Copyright Task Force Tips LLC 2022

LIC-020 May 5, 2022 Rev00

3.3 WIRING

The CrewProtect 20 is wired to the truck electrical system, allowing continuous decontamination of cabin air while the truck is actively

powered. Use the provided wiring diagram to ensure proper wiring.

Figure 3.3

4.0 OPERATION

Because the CrewProtect 20 is wired directly to the truck electrical system, continuous air decontamination occurs the entire time the

truck is actively powered.
Regular cartridge replacement ensures optimal air decontamination. See section 6.0 on page 7 for cartridge lifecycle and replacement

instructions.

NOTICE

Always disconnect power before installing or servicing electrical components. Failure to do so

could cause damage to the circuit boards.

Internal

Pigtails

Requirements:
Minimum Wire Gauge - 18 AWG

Minimum Fuse
12V system - 2A slow blow fuse
24V system - 1A slow blow fuse

12V/24V

(fuse)

Summary of Contents for CrewProtect 20









Search results

Summary of Contents for CrewProtect 20

Reviews:

Related manuals for CrewProtect 20

Brands by name

Popular brands

Task Force Tips CrewProtect 20, Instructions For Installation, Operation And Maintenance

Search results

Summary of Contents for CrewProtect 20

Reviews:

Related manuals for CrewProtect 20

Brands by name

Popular brands