1. Be thoroughly familiar with the operation of the chipper before initial use.
2. NEVER put your hands into the hopper. Always use the push stick supplied
with your chipper to push items into the hopper.
3. DO NOT try to force objects that exceed the recommended diameter and
capacity of the chipper: 1-3/8 in. (35cm).
4. AVOID ACCIDENTAL START-UPS. Be sure switch is OFF when
plugging in.
5. DO NOT FORCE THE CHIPPER. It will do the job better and with less
likelihood of injury at the rate for which it was designed.
6. Before putting objects into the hopper, remove any stones, debris, or
objects that could damage the blades.
7. During operation, ensure that there are no other persons or animals within
a radius of 10 feet. Stop using the machine while people, especially
children, or pets, are nearby.
8. NEVER reach under the chipper until it has completely stopped. The
blade may continue to rotate for a time after being switched OFF.
9. MAKE all adjustments with the power OFF and the chipper disconnected
from the power source.
10. ALWAYS use accessories provided or recommended by the manufacturer.
Do not use substitutes.
11. KEEP guards in place and in working order. Keep blades sharp. Keep
hands and feet away from cutting areas.
5
NEVER REACH INTO THE HOPPER UNTIL THE
CHIPPER HAS COME TO A COMPLETE STOP AND IS UNPLUGGED.
THE CHIPPER WILL CONTINUE TO ROTATE FOR A FEW SECONDS
AFTER IT IS SWITCHED OFF.
NEVER PLACE HANDS INTO THE EJECTION CHUTE—A
SERIOUS INJURY WILL OCCUR.
SPECIFIC SAFETY RULES FOR YARD CHIPPERS
WARNING
WARNING
