background image

8-40

Setup and Registration (System Menu) > System Menu

EcoPrint

EcoPrint conserves toner when printing. This is recommended for test copies where 
faded printing is not a problem.

Value

: Off, On

Toner Save Level (EcoPrint)

Select the default Toner Save Level (EcoPrint).

Value

: 1 (Low) to 5 (High)

NOTE

Raising the level reduces toner consumption, but image quality falls.

Override A4/Letter

Select whether to treat A4 size and Letter, which are similar in size, as the same size 
when printing.

Value

Off: A4 and Letter are not regarded as the same in size.
On: A4 and Letter are regarded as the same in size. The machine will use 
whichever size is in the paper source.

Duplex

Select binding orientation for duplex mode.

Value

: 1-sided, 2-sided Bind LongEdge, 2-sided Bind ShortEdge

Copies

Set the default number of copies, from 1 to 999.

Value

: 1 to 999 copies

Orientation

Set the default orientation, [

Portrait

] or [

Landscape

].

Value

: Portrait, Landscape

Form Feed TimeOut

Receiving print data from the computer, the machine may sometimes wait if there is 
no information signaling that the last page does not have any more data to be printed. 
When the preset timeout passes, the machine automatically prints paper. The options 
are between 5 and 495 seconds.

Value

: 5 to 495 seconds (in 5 second increments)

LF Action

Set the line feed action when the machine receives the line feed code (character 
code 0AH).

Value

: LF Only, LF and CR, Ignore LF

CR Action

Set the character return action when the machine receives the character return code 
(character code 0DH).

Value

: CR Only, LF and CR, Ignore CR

Job Name

Set whether the job name set in the printer driver is displayed.

Value

: Off, On

NOTE

When selecting [

On

], select the job name to be displayed from [

Job Name

], [

Job No. 

& Job Name

], or [

Job Name & Job No.

].

User Name

Set whether the user name set in the printer driver is displayed.

Value

: Off, On

Paper Feed Mode

While printing from the computer, select how to feed paper when the paper source 
and type are specified.

Value

Auto: Search the paper source that matches the selected paper size and type.
Fixed: Print on paper loaded in the specified paper source.

Item

Description

Summary of Contents for TASKalfa 4002i























































































































































































































































































































































































































































































































































































































































































Reviews: