17
Soiled solution pump (Option)
Empty into higher elevation:
Drain the recovery tank / fresh water tank
Recycling filter (optional):
t
Lift the fresh water tank (diaphragm sack).
t
Lay the fresh water tank (diaphragm sack) in the recovery tank.
Cleaning solution leakage.
t
Remove the empty fresh water tank (diaphragm sack) from the recovery
tank.
t
Pull out the key and operate the parking brake (see Parking brake‘ Page 9).
t
Conduct the emptying hose to a drain sink or a bucket.
t
Press the soiled solution pump button.
It will only be emptied up to the standpipe in the soiled
solution tank.
t
Pull out the key and operate the parking brake (see Parking brake‘ Page 9).
t
Fold the driver seat forward and open the tank cover.
t
Unscrew the tank lid (page 6).
If necessary with the special tank tool.
t
Clean the recovery tank thoroughly.
t
Screw down the tank lid with both hands.
t
Thoroughly flush out the fresh water tank (diaphragm sack) with fresh water.
t
Refit the fresh water tank (diaphragm sack) onto the equipment.
t
Remove dirt from tube.
t
Brush the suction filter with a soft brush or remove the fluff with a cloth.p
t
Take out recycling filter after every use and clean it if necessary.
To Order Parts Call 1-888-702-5326 - https://monsterfloorequipmentparts.com
