49
Beginning work with the machine
Cleaning start
Stairs
End of operation
Attention:
Always wear slip-resistant shoes and ap
-
propriate working clothes when working
with this machine!
Attention:
Start familiarization with the machine by
making your first driving attempts in a free
area.
• Insert the plug into the mains socket.
The display lights up.
• Hold the power supply cord in your hand.
Ensure that the power supply cord cannot come into con
-
tact with the tool.
• Hold the machine with both hands.
• Push the safety switch and operate
the operating lever at the same time.
The tool is activated.
• Cover the area in overlapping lanes.
Notice:
The machine must only be transported
over stairs by two persons.
• Switch off the machine.
• Remove the plug from the mains socket.
Attention:
Lifting the machine can be dangerous un
-
der any circumstances!
Stumbling may cause personal injuries or
machine damage.
• To lift the machine, one person grips
the machine at the machine housing
and the other person takes the ma
-
chine handle.
• Release the operating lever.
• Remove the plug from the mains socket.
Attention:
The machine must now be emptied and
cleaned. Switch off the machine (main
switch) and remove the plug from the
mains socket.
• Stand behind the machine.
• Pull the adjusting lever at the ma
-
chine handle and tilt the steel guide
bar upwards until it is completely up
-
right.
• Release the adjusting lever to lock
the steel guide bar.
Notice:
Remove the product container before tilt
-
ing the machine backwards.
• Tilt the machine backwards until the
machine handle lies on the floor.
• Remove the fixation disc from the
pad holder.
• Remove the pad.
• Screw the fixation screw back on.
Always tighten the fixation screw
very firmly, as otherwise the floor
may be damaged by the protruding
fixation screw.
• Put the machine slowly in vertical po
-
sition again.
EN
