GTS
Technical Manual
19. April 2010
Edition: V1.00/2010
5-2
Copyright © 2010, Diversey Inc.
05.0 s
w
in
go 1255 B Power - me
ch
anics
.fm
5
Mechanical
5.1
Mechanical sequences
5.1.1 Handle/Upper part
5.1.1.1 Replacing of microswitch
Picture 1: Microswitch
Remove
•
Remove the 3 screws of the cover.
•
Remove the cover.
•
Unplug hour counter wires from the hour counter or the cover.
•
Remove spring of the microswitch.
•
Remove microswitch from fixation.
•
Disconnect wires from microswitch.
Mount
•
Connect new microswitch to the wires.
•
Position the microswitch on the fixation.
Ensure that the microswitch is positioned correctly on the fixation
(pins).
•
Assemble microswitch spring.
•
Test if the microswitch is functional when moving the throttle
levers.
•
Connect the hour counter wires to the hour counter or to the
cover.
•
Assemble the cover.
•
Tighten the cover with the 3 screws.
Summary of Contents for swingo 1255B Power
