Taski swingo 1255B Power Technical Manual Download

Page: 35 / 110

GTS

Technical Manual

19. April 2010

Edition: V1.00/2010

5-14

05.0 s

go 1255 B Power - me

anics

.fm

5.1.3.2 Replacing of front blade

Remove

Picture 13: Front blade fixation

•

Tighten fixation screw until the tightening strap can be

removed (the pressure to the outer sides of the squeegee

body will be reduced).

•

Remove front blade.

Mount

•

Position new front blade.

Picture 14: Tightening strap front blade

•

Position tightening strap.

•

Loosen fixation screw until the blade is proper fixed on the

squeegee body.

Ensure that the tightening strap is positioned correct (thin part to

the bottom).

If you over tighten the tightening strap it can bulge.

Summary of Contents for swingo 1255B Power


































































































Search results

Summary of Contents for swingo 1255B Power

Reviews:

Related manuals for swingo 1255B Power

Brands by name

Popular brands

Taski swingo 1255B Power, Technical Manual

Search results

Summary of Contents for swingo 1255B Power

Reviews:

Related manuals for swingo 1255B Power

Brands by name

Popular brands