GTS
Technical Manual
19. April 2010
Edition: V1.00/2010
5-20
Copyright © 2010, Diversey Inc.
05.0 s
w
in
go 1255 B Power - me
ch
anics
.fm
5.1.4.4 Replacing of pump
Picture 20: Pumps
Remove
•
Unlock battery compartment by removing the screws of the
locking system.
•
Open the battery compartment.
•
Lower the brush drive unit to cleaning position without tools
underneath.
•
Unscrew brush housing fixation screws.
•
Remove the brush housing to get better access to the pump.
•
Remove the screws (04/112) of the pump holder (04/122).
•
Disconnect the pump wires.
•
Loosen the hose clamps on both sides of the pump.
•
Remove the fresh water hoses from the pump.
Picture 21: Pump
•
Lift up pump holder and thread out pump from pump holder.
Mount
•
Position new pump into pump holder.
Ensure that the pump is build in according to the water flow. The
arrow on the pump indicates the water flow direction.
Summary of Contents for swingo 1255B Power
