68
Squeegee assembly
Filling the fresh water tank
Dosing:
Dosing examples:
Pre-cleaning
• The machine must be switched off (main switch).
• Position the squeegee (2) below the
squeegee holder (1).
• Press the foot pedal down until the
squeegee holder engages.
• Attach the suction hose to the con
-
nector.
Attention:
Max. permissible water temperature
60 °C/140 °F.
Diversey recommends using cold water
since hot water will adjust to the floor tem
-
perature as soon as it is in contact with the
floor. Thus there are no advantages to us
-
ing hot water.
• The machine must be switched off (main switch).
• Open the tank lid.
• Fill the fresh water tank with water.
Attention:
Wear gloves, goggles and appropriate
(protective) working clothes when han
-
dling chemical products!
Notice:
Use chemical products recommended by
Diversey only and always observe the
product information.
Caution:
Using unsuitable products (e.g. products
containing chlorine, acids or solvents) may
cause harm to health and severe damage
to the machine.
1
2
2
1
Notice:
For a precise dosage, use the scale in the
dosage cup.
The filling level mark on the tank corre
-
sponds to the mark in the dosage cup. The
type of machine is noted in the dosage
cup!
Information on the packing
of the product
Tank capaci
-
ty
Product volume
per tank filling
0.25%
25 ml for 10l
of water
22l
50 ml = 0.05ll
0.5%
50ml for 10l
of water
22l
100ml = 0.1l
• Fill the dosing cup with a suitable product and pour the con
-
tent into the fresh water tank. Repeat the procedure until
the required dosing is reached.
• When dosing is finished, the dosing cup will remain in the
tank.
Attention:
Remove any objects (wooden, metal parts
etc.) from the cleaning surface.
The objects could be catapulted by the ro
-
tating tool, and thereby cause injuries to
people and damage to the environment.
