Hardware needed
8
Step 1 -Prepare the Extension panels
8 x 50mm connector bolts x 8
Hardware needed
8 x 50mm connector bolt x 8
4 x end cap screws
Attach the extension panels in pairs.
Secure each pair of the extension
panels using the 35mm
connector bolts and end caps.
Tighten the bolts firmly but
do not overtighten
Attach the end panels to the
sides using the 35mm connector
bolts and lightly hand tighten
each connector bolt.
Do not fully tighten the bolts just yet
x 4 each end
Step 2 - Attach the end panels to Extension panels
